Yesterday when trasfering midifiles 2 audio everything worked out
fine,but 2day all of a sudden I can't record audio.
I have a Behringer mx 602 mixer & I get the sound ok from my
keyboard into the mixer but somewhere along the line from the
mixer 2 the soundcard in the computer I don't get anything.
I switched the cable 2 another pair from tape out in the mixer 2 the
computer but still nothing.But it worked yesterday.
Have any1 experienced the same problem & could give a hand?
/peace Manki

Well, it's very hard to find out what the problem is without being able to check it myself.
You checked the cables, which would be the first thing I'd check too.
Check and see if there's any button that controls either levels or routing to the tape out - although I don't there is one.
Last thing might be the input of your sound card.
Try connecting your synth directly to your sound card and see if that works.

Thank U 4 helping me out Heavenly,
yes I did as U said.I connected a mic directly 2 the soundcard & I
recieve signal so that´s working,plus I get the signal back in my headphones
from the mixer so that's fine.The trouble is that I use Logic
& when beeing in the audio window I can't get the signal.
So it's in Logic I can't record on my audio tracks,even if I go
directly 2the computer.
/peace Manki

I don't know logic very well, I'm using Cubase SX 2 myself.
But try and check in the audio channel, if you have a place to choose your input. Checking the output routing won't hurt either.
Also maybe there's a "monitor" button in the channel that might be switched off.

You can also check again in the preferences to see that the Asio Driver hasn't changed to something else by mistake.

My Behringer board just stopped working as well.

They offered to look at it but I didn't pay that much to justify sending it back.

I tried everything, cables, sound cards, etc. The board is the common problem, so if I don't send it back I'm going to tear it apart in an effort to fix it.

I also have a line on another board from a friend so hopefully that will be fine.

No help for you, I know, but I thought I would share my story of the Behringer piece of shit board. Are there any other boards my different manufacturer's that you reccommend (in a cheap price range)?