independent and unofficial
Prince fan community
Welcome! Sign up or enter username and password to remember me
Forum jump
Forums > Music: Non-Prince > Cassettes...what can I do with them
« Previous topic  Next topic »
Page 1 of 2 12>
  New topic   Printable     (Log in to 'subscribe' to this topic)
Author

Tweet     Share

Message
Thread started 07/10/07 7:21pm

funkyslsistah

avatar

Cassettes...what can I do with them

They were a major part of my music listening life. Even though I have been steadily replacing the cassette tapes with cd, I don't want to replace all of them. With a collection of over 400 cassette tapes shrouded in dust, I am left with these series of questions.

Is there any way cassettes can be transferred to cd or mp3? I want to actually listen to the music but in mp3 form for my Ipod. Has anybody done that? What equipment is needed to do that?
"Funkyslsistah… you ain't funky at all, you just a little ol' prude"!
"It's just my imagination, once again running away with me."
  - E-mail - orgNote - Report post to moderator
Reply #1 posted 07/10/07 7:27pm

theodore

I think so but I don't know how shrug

like there's this place here in my city where they do that confused
  - E-mail - orgNote - Report post to moderator
Reply #2 posted 07/10/07 7:33pm

Stax

avatar

What I would do is plug a tape player into my stereo receiver aux input, plug my mac into my stereo receiver aux output, fire up Wire Tap Pro (or a similar program) and record the audio signal from the tape player as mp3 files on my computer. This can be done with a PC, as well, but I am not familiar with appropriate software. I'm sure there is freeware or shareware that will do the job.
a psychotic is someone who just figured out what's going on
  - E-mail - orgNote - Report post to moderator
Reply #3 posted 07/10/07 7:44pm

StarMon

avatar

Stax said:

What I would do is plug a tape player into my stereo receiver aux input, plug my mac into my stereo receiver aux output, fire up Wire Tap Pro (or a similar program) and record the audio signal from the tape player as mp3 files on my computer. This can be done with a PC, as well, but I am not familiar with appropriate software. I'm sure there is freeware or shareware that will do the job.


nod That's wut i'm talkin' 'bout, keep those gems.
✮The NFL...frohornsNational Funk League✮
✮The Home of Outta Control Funk & Roll✮
  - E-mail - orgNote - Report post to moderator
Reply #4 posted 07/10/07 8:58pm

heartbeatocean

avatar

Stax said:

What I would do is plug a tape player into my stereo receiver aux input, plug my mac into my stereo receiver aux output, fire up Wire Tap Pro (or a similar program) and record the audio signal from the tape player as mp3 files on my computer. This can be done with a PC, as well, but I am not familiar with appropriate software. I'm sure there is freeware or shareware that will do the job.


wait, how do you plug your Mac into your receiver aux output? Does your Mac have an RCA out? What cable/connector do you use? Because I don't see a way to do that with my Mac...
  - E-mail - orgNote - Report post to moderator
Reply #5 posted 07/10/07 9:06pm

Stax

avatar

heartbeatocean said:

Stax said:

What I would do is plug a tape player into my stereo receiver aux input, plug my mac into my stereo receiver aux output, fire up Wire Tap Pro (or a similar program) and record the audio signal from the tape player as mp3 files on my computer. This can be done with a PC, as well, but I am not familiar with appropriate software. I'm sure there is freeware or shareware that will do the job.


wait, how do you plug your Mac into your receiver aux output? Does your Mac have an RCA out? What cable/connector do you use? Because I don't see a way to do that with my Mac...


with my receiver, I'd have to use a cable with a RCA plug on one end (to the receiver's aux out) and an 1/8th in jack on the other end (to the mac's mic input). alternatively, i could use a cable with a 1/4 inch jack at one end (to the receiver's headphone out) and an 1/8th inch jack on the other end (to the macs mic input). On a PC, I could go rca to rca, if the pc sound card has rca inputs, as many do.
a psychotic is someone who just figured out what's going on
  - E-mail - orgNote - Report post to moderator
Reply #6 posted 07/10/07 9:09pm

heartbeatocean

avatar

Stax said:

heartbeatocean said:



wait, how do you plug your Mac into your receiver aux output? Does your Mac have an RCA out? What cable/connector do you use? Because I don't see a way to do that with my Mac...


with my receiver, I'd have to use a cable with a RCA plug on one end (to the receiver's aux out) and an 1/8th in jack on the other end (to the mac's mic input). alternatively, i could use a cable with a 1/4 inch jack at one end (to the receiver's headphone out) and an 1/8th inch jack on the other end (to the macs mic input). On a PC, I could go rca to rca, if the pc sound card has rca inputs, as many do.


No way. I had no idea I could hook a mini from the mic or headphone jack to other devices. eek OMG!!! highfive

That changes my entire life! biggrin
  - E-mail - orgNote - Report post to moderator
Reply #7 posted 07/10/07 9:16pm

Stax

avatar

heartbeatocean said:

Stax said:



with my receiver, I'd have to use a cable with a RCA plug on one end (to the receiver's aux out) and an 1/8th in jack on the other end (to the mac's mic input). alternatively, i could use a cable with a 1/4 inch jack at one end (to the receiver's headphone out) and an 1/8th inch jack on the other end (to the macs mic input). On a PC, I could go rca to rca, if the pc sound card has rca inputs, as many do.


No way. I had no idea I could hook a mini from the mic or headphone jack to other devices. eek OMG!!! highfive

That changes my entire life!
biggrin


yay!
a psychotic is someone who just figured out what's going on
  - E-mail - orgNote - Report post to moderator
Reply #8 posted 07/10/07 10:42pm

funkyslsistah

avatar

Wow thanks for the info!
"Funkyslsistah… you ain't funky at all, you just a little ol' prude"!
"It's just my imagination, once again running away with me."
  - E-mail - orgNote - Report post to moderator
Reply #9 posted 07/11/07 12:08am

SoulAlive

I have a ton of cassettes too...been wondering what to do with them lol
  - E-mail - orgNote - Report post to moderator
Reply #10 posted 07/11/07 12:25am

theAudience

avatar

Stax said:


with my receiver, I'd have to use a cable with a RCA plug on one end (to the receiver's aux out) and an 1/8th in jack on the other end (to the mac's mic input). alternatively, i could use a cable with a 1/4 inch jack at one end (to the receiver's headphone out) and an 1/8th inch jack on the other end (to the macs mic input). On a PC, I could go rca to rca, if the pc sound card has rca inputs, as many do.

One caveat i'll throw into your otherwise good suggestion.
I'm guessing that the mic in on the Mac is more than likely MONO(?), whereas the cassette tapes you're transferring are STEREO.

If your receiver had a stereo line output (L&R RCA) and the Mac has some type of stereo input (stereo 1/8 inch mini) that would be give you a stereo transfer.

geek

tA

peace Tribal Disorder

http://www.soundclick.com...dID=182431
"Ya see, we're not interested in what you know...but what you are willing to learn. C'mon y'all."
  - E-mail - orgNote - Report post to moderator
Reply #11 posted 07/11/07 12:30am

Raze

avatar

wall decorations!

"Half of what I say is meaningless; but I say it so that the other half may reach you." - Kahlil Gibran
  - E-mail - orgNote - Report post to moderator
Reply #12 posted 07/11/07 12:54am

Nightcrawler

See the man with the blue guitar, maybe one day he`ll be a star...
  - E-mail - orgNote - Report post to moderator
Reply #13 posted 07/11/07 6:15am

Stax

avatar

theAudience said:

Stax said:


with my receiver, I'd have to use a cable with a RCA plug on one end (to the receiver's aux out) and an 1/8th in jack on the other end (to the mac's mic input). alternatively, i could use a cable with a 1/4 inch jack at one end (to the receiver's headphone out) and an 1/8th inch jack on the other end (to the macs mic input). On a PC, I could go rca to rca, if the pc sound card has rca inputs, as many do.

One caveat i'll throw into your otherwise good suggestion.
I'm guessing that the mic in on the Mac is more than likely MONO(?), whereas the cassette tapes you're transferring are STEREO.

If your receiver had a stereo line output (L&R RCA) and the Mac has some type of stereo input (stereo 1/8 inch mini) that would be give you a stereo transfer.

geek

tA

peace Tribal Disorder

http://www.soundclick.com...dID=182431


On my Mac (G4 Powerbook), the audio line in is 16 bit stereo The built-in, internal mic is mono, however.
a psychotic is someone who just figured out what's going on
  - E-mail - orgNote - Report post to moderator
Reply #14 posted 07/11/07 8:13am

daPrettyman

avatar

funkyslsistah said:

They were a major part of my music listening life. Even though I have been steadily replacing the cassette tapes with cd, I don't want to replace all of them. With a collection of over 400 cassette tapes shrouded in dust, I am left with these series of questions.

Is there any way cassettes can be transferred to cd or mp3? I want to actually listen to the music but in mp3 form for my Ipod. Has anybody done that? What equipment is needed to do that?

I've done it for a few songs. The quality is not that great. You tend to get a lot of hiss when transferring from cassette. You usually get a better file when you transfer from vinyl.
**--••--**--••**--••--**--••**--••--**--••**--••-
U 'gon make me shake my doo loose!
http://www.twitter.com/nivlekbrad
  - E-mail - orgNote - Report post to moderator
Reply #15 posted 07/11/07 9:39am

CalhounSq

avatar

Mine are in a crate in my mom's garage biggrin

shrug
heart prince I never met you, but I LOVE you & I will forever!! Thank you for being YOU - my little Princey, the best to EVER do it prince heart
  - E-mail - orgNote - Report post to moderator
Reply #16 posted 07/11/07 9:56am

heartbeatocean

avatar

theAudience said:

Stax said:


with my receiver, I'd have to use a cable with a RCA plug on one end (to the receiver's aux out) and an 1/8th in jack on the other end (to the mac's mic input). alternatively, i could use a cable with a 1/4 inch jack at one end (to the receiver's headphone out) and an 1/8th inch jack on the other end (to the macs mic input). On a PC, I could go rca to rca, if the pc sound card has rca inputs, as many do.

One caveat i'll throw into your otherwise good suggestion.
I'm guessing that the mic in on the Mac is more than likely MONO(?), whereas the cassette tapes you're transferring are STEREO.

If your receiver had a stereo line output (L&R RCA) and the Mac has some type of stereo input (stereo 1/8 inch mini) that would be give you a stereo transfer.

geek

tA

peace Tribal Disorder

http://www.soundclick.com...dID=182431


But I could probably buy a card with RCA inputs, no?
  - E-mail - orgNote - Report post to moderator
Reply #17 posted 07/11/07 9:59am

heartbeatocean

avatar

Stax said:

theAudience said:


One caveat i'll throw into your otherwise good suggestion.
I'm guessing that the mic in on the Mac is more than likely MONO(?), whereas the cassette tapes you're transferring are STEREO.

If your receiver had a stereo line output (L&R RCA) and the Mac has some type of stereo input (stereo 1/8 inch mini) that would be give you a stereo transfer.

geek

tA

peace Tribal Disorder

http://www.soundclick.com...dID=182431


On my Mac (G4 Powerbook), the audio line in is 16 bit stereo The built-in, internal mic is mono, however.


What do you mean "audio line in"? You mean the mic in connector? What is the built in mic? confuse (I know there's a built in mic on my PC laptop, but I don't see one on my Mac) I have to get this straight. lol I have a G4 tower.
  - E-mail - orgNote - Report post to moderator
Reply #18 posted 07/11/07 1:52pm

daPrettyman

avatar

heartbeatocean said:

Stax said:



On my Mac (G4 Powerbook), the audio line in is 16 bit stereo The built-in, internal mic is mono, however.


What do you mean "audio line in"? You mean the mic in connector? What is the built in mic? confuse (I know there's a built in mic on my PC laptop, but I don't see one on my Mac) I have to get this straight. lol I have a G4 tower.

On ur pc, u usually have a "line in" jack on the back. You can use the mic in also, but it doesn't record it as well as the line in.
**--••--**--••**--••--**--••**--••--**--••**--••-
U 'gon make me shake my doo loose!
http://www.twitter.com/nivlekbrad
  - E-mail - orgNote - Report post to moderator
Reply #19 posted 07/11/07 2:00pm

theAudience

avatar

Stax said:

On my Mac (G4 Powerbook), the audio line in is 16 bit stereo The built-in, internal mic is mono, however.

Excellent.


tA

peace Tribal Disorder

http://www.soundclick.com...dID=182431
"Ya see, we're not interested in what you know...but what you are willing to learn. C'mon y'all."
  - E-mail - orgNote - Report post to moderator
Reply #20 posted 07/11/07 2:04pm

Graycap23

funkyslsistah said:

They were a major part of my music listening life. Even though I have been steadily replacing the cassette tapes with cd, I don't want to replace all of them. With a collection of over 400 cassette tapes shrouded in dust, I am left with these series of questions.

Is there any way cassettes can be transferred to cd or mp3? I want to actually listen to the music but in mp3 form for my Ipod. Has anybody done that? What equipment is needed to do that?

Record and covert 2 cd's. It's time comsuming but worth it. If nothing else, play them as u always have. I have at least a 1000 plus and pull some out from time 2 time.
Most efficient way 2 convert:
Get a 16 bit sound card 4 your computer: Line out of casette deck 2 line in of sound card. Record and edit as each side of each cassette is complete.
[Edited 7/11/07 14:06pm]
  - E-mail - orgNote - Report post to moderator
Reply #21 posted 07/11/07 2:05pm

theAudience

avatar

heartbeatocean said:



But I could probably buy a card with RCA inputs, no?

Yes.

tA

peace Tribal Disorder

http://www.soundclick.com...dID=182431
"Ya see, we're not interested in what you know...but what you are willing to learn. C'mon y'all."
  - E-mail - orgNote - Report post to moderator
Reply #22 posted 07/11/07 2:18pm

NewPowerSista

avatar

daPrettyman said:

funkyslsistah said:

They were a major part of my music listening life. Even though I have been steadily replacing the cassette tapes with cd, I don't want to replace all of them. With a collection of over 400 cassette tapes shrouded in dust, I am left with these series of questions.

Is there any way cassettes can be transferred to cd or mp3? I want to actually listen to the music but in mp3 form for my Ipod. Has anybody done that? What equipment is needed to do that?

I've done it for a few songs. The quality is not that great. You tend to get a lot of hiss when transferring from cassette. You usually get a better file when you transfer from vinyl.


Hi Prettyman:
What's the easiest way for me to transfer my vinyl to cd? I've been trying to get that together for months! sad I have cassettes too, but the vinyl is really important to me and I'd like to store the vinyl and play the cds! Thanks.
Never trust anything spoken in the presence of an erection.
H Michael Frase
  - E-mail - orgNote - Report post to moderator
Reply #23 posted 07/11/07 2:22pm

Stax

avatar

NewPowerSista said:

daPrettyman said:


I've done it for a few songs. The quality is not that great. You tend to get a lot of hiss when transferring from cassette. You usually get a better file when you transfer from vinyl.


Hi Prettyman:
What's the easiest way for me to transfer my vinyl to cd? I've been trying to get that together for months! sad I have cassettes too, but the vinyl is really important to me and I'd like to store the vinyl and play the cds! Thanks.


same way, but you first have to run the turntable through a phono preamp then into the reciever. many older recievers have built in phono preamps, but most don't these days.
a psychotic is someone who just figured out what's going on
  - E-mail - orgNote - Report post to moderator
Reply #24 posted 07/11/07 2:24pm

Stax

avatar

heartbeatocean said:

Stax said:



On my Mac (G4 Powerbook), the audio line in is 16 bit stereo The built-in, internal mic is mono, however.


What do you mean "audio line in"? You mean the mic in connector? What is the built in mic? confuse (I know there's a built in mic on my PC laptop, but I don't see one on my Mac) I have to get this straight. lol I have a G4 tower.


I don't know about the tower, but the G4 laptop has a 1/8 mini audio line in right next to the 1/8 mini headphone out. The laptop also has a built in mono mic, but it is pretty much useless. I suspect your tower has a 1/8 mini line in on the back.
a psychotic is someone who just figured out what's going on
  - E-mail - orgNote - Report post to moderator
Reply #25 posted 07/11/07 2:44pm

NewPowerSista

avatar

Stax said:

NewPowerSista said:



Hi Prettyman:
What's the easiest way for me to transfer my vinyl to cd? I've been trying to get that together for months! sad I have cassettes too, but the vinyl is really important to me and I'd like to store the vinyl and play the cds! Thanks.


same way, but you first have to run the turntable through a phono preamp then into the reciever. many older recievers have built in phono preamps, but most don't these days.



Thank you, Stax!!!
Never trust anything spoken in the presence of an erection.
H Michael Frase
  - E-mail - orgNote - Report post to moderator
Reply #26 posted 07/11/07 2:52pm

NWF

avatar

Nah, man. You should keep them. I still listen to cassettes to this day. There's nothing like that classic sound. Forget this digital age stuff. lol
NEW WAVE FOREVER: SLAVE TO THE WAVE FROM THE CRADLE TO THE GRAVE.
  - E-mail - orgNote - Report post to moderator
Reply #27 posted 07/11/07 5:34pm

GaryMF

avatar

Do a google search and you;ll find lots of step by step tutorials for converting vinyl and cassettes to MP3.

I did it on my iBook using a product called iMic to create a stereo input to my Mac notebook

http://www.griffintechnol...ucts/imic/
rainbow
  - E-mail - orgNote - Report post to moderator
Reply #28 posted 07/11/07 8:29pm

heartbeatocean

avatar

daPrettyman said:

heartbeatocean said:



What do you mean "audio line in"? You mean the mic in connector? What is the built in mic? confuse (I know there's a built in mic on my PC laptop, but I don't see one on my Mac) I have to get this straight. lol I have a G4 tower.

On ur pc, u usually have a "line in" jack on the back. You can use the mic in also, but it doesn't record it as well as the line in.


My Mac doesn't have a line in, just a mic in. My PC laptop only has a mic in and what looks like an RCA line out for a monitor (?).
  - E-mail - orgNote - Report post to moderator
Reply #29 posted 07/11/07 8:31pm

heartbeatocean

avatar

Graycap23 said:

funkyslsistah said:

They were a major part of my music listening life. Even though I have been steadily replacing the cassette tapes with cd, I don't want to replace all of them. With a collection of over 400 cassette tapes shrouded in dust, I am left with these series of questions.

Is there any way cassettes can be transferred to cd or mp3? I want to actually listen to the music but in mp3 form for my Ipod. Has anybody done that? What equipment is needed to do that?

Record and covert 2 cd's. It's time comsuming but worth it. If nothing else, play them as u always have. I have at least a 1000 plus and pull some out from time 2 time.
Most efficient way 2 convert:
Get a 16 bit sound card 4 your computer: Line out of casette deck 2 line in of sound card. Record and edit as each side of each cassette is complete.
[Edited 7/11/07 14:06pm]


Cool.
  - E-mail - orgNote - Report post to moderator
Page 1 of 2 12>
  New topic   Printable     (Log in to 'subscribe' to this topic)
« Previous topic  Next topic »
Forums > Music: Non-Prince > Cassettes...what can I do with them